Among the different technologies used by cars, lighting is an area that is also constantly changing. Headlights are for seeing and being seen. A lot of good tips about car headlights and other vehicle components I found in the website https://avto-obzor.com/.
There are 4 types of headlights:
- Traffic lights. Low-beam headlights allow you to see and be seen from 30 meters away in built-up areas, on roads and motorways. They are also used during the day in case of rain, snow, fog or even under a tunnel. Low beam lights shine further to the right, the side where the traffic signs and possibly pedestrians are located, then to the left to limit the dazzling of vehicles coming in the opposite direction, hence their name “low beam”.
- Position lights. They are also called “night lights”. Low power, these headlights (at the front and rear of the vehicle) allow you to be seen 150 meters away when the light decreases, in built-up areas or rainy weather. They are mainly used to be visible when parking or stopping on a poorly lit road. On the other hand, they do not help improve your visibility. To do this, you must use low-beam headlights.
- Fog lights. The fog lights are very powerful. They are used in heavy rain, snow or fog. Please note, that the rear fog lights cannot be used in rainy weather. Only one rear fog light is mandatory. It should be on the right side.
- High beams. High beams or “full headlights” illuminate at least 100 meters. They can be used outside built-up areas, on unlit or poorly lit roads. If you pass or follow other motorists, or in a tunnel, you must turn them off and switch back to low beam for obvious reasons of risk of dazzling. They are also used to flash the headlights to attract attention or warn of danger.
Daytime running lights
Daytime running lights come from the European Commission’s desire to improve road safety. After several experiments carried out in 1995 and 2002, daytime running lights have become compulsory since January 1, 2011.
The different types of automotive lighting
There are many types of lighting, from the most traditional to the most modern and innovative. All have advantages and disadvantages, as you can imagine the most recent and complex technologies are still relatively expensive. For example you can choose led car lighting.
What is the best lighting technology?
It is difficult to say which novelty in automotive lighting is the most efficient because it depends on the needs and preferences of each driver, but above all, on the budget available to them. However, laser lighting is considered one of the most efficient lighting systems because it provides a longer and brighter lighting range than other systems. This technology is still quite expensive and is therefore generally reserved for the most luxurious models. However, it should tend to become more democratic over the years.
Among the most recent developments, we will also mention:
- Adaptive lighting: the lights can automatically adjust to illuminate the road more effectively, depending on driving conditions, particularly when cornering.
- Automatic headlights: for several years now, some vehicles have been equipped with automatic headlights that turn on and off depending on the lighting conditions.
- Matrix lighting: this technology uses laser headlights, but its particularity is that the light beam can take any shape (including light “signals” projected on the road) and move depending on driving and traffic road.
- Intelligent lighting: certain vehicles are equipped with intelligent lighting technologies, capable of automatically managing the transition from low beam to high beam and vice versa.
Why do you need to change headlights in pairs?
It is generally better to change both left and right bulbs simultaneously rather than changing just one. This ensures that your vehicle’s lighting remains even and balanced on both sides, which is important for driving safety. In addition, changing both bulbs at the same time can avoid imbalances in light and electrical intensity, causing the bulb to “burn out”.
It is also possible that both bulbs are damaged or worn out in the same way and so it makes sense to replace them at the same time to avoid future lighting problems. Changing both bulbs at the same time can therefore save you time and money in the long run, by preventing you from having to replace a single bulb multiple times in the future. Visit this website to learn more about cars and its service.
